10
www.BISSELL.com.au
7
8
9
5
3
1
2
DRY MODE NOTE:
Use a “raking” motion to clean carpets and upholstery. Start with the
tool farthest away and rake in small increments as you bring the tool toward you. The
rubber nubs will help attract hair to the suction channel.
Attach the tool and select dry mode
to first pick up dry debris and pet
hair from carpet and upholstery. The
suction will be at the lower part of
the tool, near the dry cup.
Follow hose plug-in instructions from
steps 1 & 2 on page 9.
Using the 2-in-1 Pet Upholstery Tool
*Make sure your Clean Water Tank has water & formula to use the tool in wet mode.
Turn OFF the machine.
Hold the cup and twist
counter-clockwise to line
up the arrow with the
unlock symbol and remove.
Take off the cup
to empty hair
and debris.
To Deep Clean carpet
and upholstery, move the
switch to wet mode. Press
the trigger to spray water
and formula; use the top of
the nozzle to extract stains
and odours.
To remove hair or
trapped debris from the
nozzle, first turn OFF the
machine. Pull the nozzle
tab away from the tool
to remove and rinse
under running water.
To replace, line up the
nozzle edge and snap
into place. Before storing,
make sure all hair is
removed from the dry
cup and nozzle has been
rinsed and dried.
Dry Mode
(switch up)
Wet Mode
(switch
down)
Empty the cup
when it fills with hair
and debris.
Dry
Suction
Channel
Remove hair
that may wrap
around the filter.
Wet
Suction
Channel
WET MODE NOTE:
Start from the area farthest away. Hold the trigger down, and pull the
tool toward you. Keep the tool in contact with the surface as you pull. You will see extraction
through the nozzle.
4
6
To reattach the cup,
line up the cup to the
tool indents, and rotate
clockwise. The arrow will
line up with the locked
icon when secured.
