20
w w w . b i s s e l l . c o m
M
aintenance and care
Machine care (continued)
5.
The inside of the end caps by the brush rolls
can be wiped out with a clean paper towel
or, if a more thorough cleaning is desired, the
end caps can be taken off using a Phillips
head screwdriver and rinsed clean.
Replace after cleaning.
6.
Any loose hair or debris can be pulled from the
brush rolls and thrown away. For the most
thorough clean before storage, follow directions
on pages 21 & 22 for removal and replacement
of the brush rolls and belts.
7.
To clean attachments that may have been
used, remove from hose and rinse in
clean, running water. Dry and replace
attachment in the tool caddy. Clean the hose
by suctioning clean water from the tap.
Before replacing, lift end of hose and stretch
out to ensure all water is cleared from hose.
Refer to page 14, illustrations 9 & 10.
8.
After carpet is dry, vacuum again to remove
hair and fuzz.
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
ug120-4042_9500E.indd 20
ug120-4042_9500E.indd 20
5/7/08 3:37:48 PM
5/7/08 3:37:48 PM
