w w w. b i s s e l l . c o m
11
o
perations
Hard Floor Cleaning
Your PowerWash PowerBrush Select
deep cleaner may have included
a hard floor tool and Hard Floor
Solutions. The hard floor tool provides
effective cleaning for linoleum, vinyl,
and tile floors.
Caution: Do not use on unsealed
hardwood floors.
1.
Thoroughly vacuum or sweep floor to
pick up any debris.
NOTE: Prior to filling with formula
and water be sure all carpet
cleaning formula is thoroughly
rinsed from the 2-in-1 water tank.
2.
Fill BISSELL Hard Floor Solutions to the
indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3.
Fill the bladder with clean hand hot tap
water and set aside.
4.
Attach the hard floor tool to the bottom
of the machine by hooking it into the
nozzle and swinging it down until it
clicks into place.
5.
Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6.
Plug into an outlet and turn the power on.
7.
Plan your cleaning route to leave an
exit path. Be sure to allow adequate
time for floors to dry.
8.
While pressing the spray trigger, make
one slow forward wet pass and another
back.
Caution: Do Not Overwet.
9.
Repeat the motion without pressing the
spray trigger using the hard floor tool to
squeegee and suction up the dirty water.
10.
When finished, remove hard floor tool,
rinse and let dry before storing. Refer
to the Maintenance and care section
on page 12 for machine clean up and
storage instructions.
Hard Floor Tool
