Prepared by Monique Lania
8Care & Maintenance of Bissell Deep Cleaner
Clean the filters
1. Upper-tank Filter
**NOTE: For easier access the entire Upper Tank may be removed by turning the red
knob on the back of the cleaner to ‘unlock’ position and pulling the entire tank straight
out. Ensure the knob is turned back to ‘lock’ when Upper Tank is replaced back in
cleaner.
2. Pre-motor Filter
Lift out the foam filter
The foam filter may be hand washed in cold tap water with a mild detergent.
Rinse well and then air dry thoroughly. **Ensure filter is 100% dry before placing
back into vacuum
Switch off the cleaner and unplug it from the electrical outlet
The upper tank filter can be reached by removing the Dirt Container, reaching in underneath the
Upper Tank and turning the rim of the red Filter Frame to unlock. Pull it straight down to remove.
Brush the dirt off the Upper Tank and Louvers.
The foam Upper Tank filter may be removed and hand washed in cold tap water with a mild
detergent. Rinse well and then air dry thoroughly. **Ensure filter is 100% dry before placing
back into vacuum
The Upper Tank and Louvers may be wiped clean using a damp cloth and then dried using a dry cloth.
Pull out the black slide-out tray located underneath the Dirt Container
