Bissell POWERSTEAM BGST1566 SERIES, Руководство пользователя

Страница: 7 / 12

Getting ready
The mop pad may have already come attached
to the mop head, if not follow step 1a below.
1. Set mop head in mop pad, making sure
quick-grip release tab is located on the back.
2. Fill the water tank
a. Remove tank by lifting straight up
and away from unit.
b. Unscrew cap at bottom of water tank.
c.
Fill water tank with water. For best results,
water should be at room
temperature.
d. Replace the cap, tighten until snug.
e. Replace water tank by gently sliding tank
into place and press down firmly.
3. Twist the Quick Release™ cord wrap
clockwise to unwrap the power cord completely
and plug into a 120-Volt outlet as described on
the Important Safety Instructions, page 3.
4. SmartSet™ Steam Select Indicator light will
glow when steam mop is ready to use. Press
the Steam Level button to choose the level of
steam you desire.
NOTE: Upon first use of the steam mop or first
use after refilling the water tank, the pump may
make a “knocking” sound. This is normal and
should only last a few seconds.
7
Operations
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
1.
2a. 2b.
www.bissellcommercial.com