This easy-to-use system is designed with a bladder inside the
tank to hold clean water. As you clean, the bladder will empty.
Dirty water collects in the tank outside the bladder.
Depress the Handle Release pedal to tilt back
the handle.
Lift the Tank-in-Tank handle. The handle locks the lid in
place. To fill with water, carry the Tank-in-Tank by the handle
to the sink.
Set the Tank down and rotate the handle forward to
unlatch the Lid. Lift off and set the Lid aside.
Fill the bladder with hot tap water up to the bottom of
the neck.
Do not boil or microwave water as it can
destroy the bladder.
NOTE: Fill slowly to reduce sudsing.
Replace the Tank Lid, matching the Lid and Tank
edges.
Handle must be in the forward position
to reinstall.
Rotate the handle to carrying position to
relatch the lid. Replace Tank in machine base, seating
firmly in place. Rotate handle back and push down to
latched position.
7
To Fill The Tank-in-Tank
1.
2.
3.
4.
5.
Tilt Handle
Back
Handle
Release
Lift and
Carry
Rotate Handle to
Unlatch
1
2
3
4
5
NOTE: Fill
Bladder with
clean hot tap
water only.
Latched
