Bissell PowerFresh 1440, Руководство пользователя

Страница: 5 / 8

www.bissell.com
5
A
Product View
1 Steam-on-Demand Trigger
2 Strain Reliever Handle™
3 Quick Release™ Cable Wrap
4 Removable Water Tank
5 Lower Cable Wrap
6 Smart Set™ Steam Control
7 Manoeuvrable Swivel
8 Removable & Washable
EasyScrubber™
9 Low Profile, Edge-Cleaning
Mop Head
10 Washable Microfiber Mop
Pads with Microban®
Antibacterial Product
Protection (2-pack)
11 Carpet Refresher
Attachment
12 Spring Breeze Fragrance
Discs Replacement Pack
(2-pack)
13 Water Filter Replacement
14 Removable Water Tank With
Replaceable Water Filter
to help keep your pads fresher and cleaner
between uses.
2 - Spring breeze fragrance discs
1.
Attach lower body to mop head by
snapping it into place.
2.
slide handle assembly down and screw
until tightened.
PowerFresh steam Mop assembly is complete.
C
Operations
Getting ready
The mop pad may have already come
attached to the mop head, if not follow
steps 1A and 1b below.
1.
Add Freshening Disc and Attach Mop Pad
a. insert spring breeze Freshening Disc
into pocket inside mop pad. Use the
whole disc for a refreshing scent or
cut in half for a lighter scent.
b.
set mop head in mop pad, making
sure quick-grip release tab is located
on the back.
2. Fill the water tank
for tank without filter
a.
Remove tank by lifting straight up
and away from unit.
b. Unscrew cap at bottom of water tank.
c. Fill water tank with water. For best
results, water should be at room
temperature.
d. Replace the cap, tighten until snug.
e.
Replace water tank by gently sliding
tank into place and press down firmly.
for tank with filter
f. Remove tank by lifting straight up and
away from unit.
g.
Press down on the Filter Release
button and slide filter forward to
access Water Tank.
h. Fill tank with water. For best results,
water should be at room temperature.
i.
slide Filter back onto the Water Tank
until it clicks into place.
j. Replace water tank by gently sliding
tank into place and press down firmly.
3. Twist the Quick Release™ cable wrap
clockwise to unwrap the power cable
completely and plug into a 220-240 Volt
electrical socket as described on the
important safety instructions, page 3.
4. smartset™ steam select indicator light
will glow when PowerFresh steam Mop is
ready to use. Press the steam level button to
choose the level of steam you desire. Depress
the steam-on-Demand trigger located on the
handle to begin steam cleaning.
B
Assembly
Your PowerFresh™ steam Mop assembles
quickly and easily. it is packaged with the
following items:
Handle Assembly with one screw
lower body
manoeuvrable mop Head
Removable Water tank (comes
With Replaceable Water filter
on Select models) (A)
The water tank is located on the top of the
PowerFresh™ steam Mop. it can be refilled
with water any time during use. Distilled or
demineralized water is recommended. On
select models, this tank is connected to a
removable, replaceable water filter that
prolongs the life of your steam mop by
filtering out tap water minerals.
Removable easy Scrubber
(Attached to mop Head)
Clean sticky messes by pressing the easy
scrubber with your foot and locking it into
position. Clean grout and crevices with this tool.
2 - powerfresh™ microfibre mop pads with
microban® Antibacterial protection
Reusable microfibre mop pads are machine
washable and safe for virtually all hard floor
surfaces. Your PowerFresh may have come
with two different pads. The white microfi-
bre pad is best for everyday use on delicate
flooring like sealed hardwoods and laminate.
The gray and white striped pad can be used
for scrubbing heavily soiled floors and clean-
ing tougher messes. These steam mop pads
contain built-in Microban® antibacterial
protection that helps prevent the growth of
99.9% of harmful bacteria on the pad surface
EN
Do not plug in your steam mop until you are familiar
with all instructions and operating procedures.
Do not use chemicals in the water tank of your
PowerFresh Steam Mop.