Bissell POWERCLEAN PET 1285K, Руководство пользователя

Страница: 7 / 12

Carpet cleaning
1. With your foot, press the red power lever
[located in foot of unit] ON.
2. With foot, press the recline lever on left
side of lower body.
3. Depress spray trigger to spray cleaning
solution. Do not overwet.
4.
To suction up water, repeat motion over
same area without pressing the spray trigger.
5.
Repeat steps 3 and 4 until no more dirt
can be removed.
6. Continue to clean entire carpet, working
in 1m x 1m sections.
7. Empty the collection tank when dirty water
reaches the full line, or when the clean water/
solution tank is empty.
8.
If floor nozzle stops spraying, turn power
lever OFF and check water and cleaning solution
levels. Refill if needed.
Empty collection tank
1. Turn power lever OFF and unplug power cord
from outlet.
2. Remove and empty collection tank.
a. Release collection tank latches [1 each
side] by pulling up from bottom of latch
and then out.
b.
Carefully remove collection tank from
lower body by lifting handle.
c.
Carry collection tank to a toilet or sink.
To empty, pour out contents using opening
at back of tank.
d.
Rinse collection tank thoroughly.
e. Remove lint and hair from red gasket
in base of unit.
(Do not remove gasket)
3. Clean nozzle window by lifting latch
and removing from machine. Rinse under
running water. When finished replace nozzle
and secure with latch.
4.
Replace collection tank on base of unit and
secure with latches.
Operations
www.BISSELL.com
7
3.
2c.
2b.
2e.
2a.
» It is recommended that every time
your clean water/solution tank
needs refilling, that you empty the
contents of the collection tank. If
the collection tank gets too full, you
may begin to see foam spitting out
of the vent cover. If this happens
empty the collection tank.
Tip