
BISSELL.com
7
Problem Possible Cause
Remedies
Reduced
spray or
no spray
Spray nozzle clogged
Clean spray nozzle
Clean Water Tank empty
Refill tank
Clean Water Tank insert
clogged
Clean insert at bottom of tank
Pump needs priming
Gently lift Clean Water Tank while pressing the spray
trigger OR gently squeeze clean tank while pressing
spray trigger
Machine
won’t
pick up
cleaning
solution
Tank release latch is not closed
properly
Lift up the tank release latch and press down firmly to
make sure it is in place
Poor tool position
Reposition tool on surface, follow recommended
cleaning procedures
Dirty Water Tank is full
Empty tank
Tool brush worn
Replace with new brush
Excess solution in flex hose
Lift tool and point upwards to allow water in hose to
flow into the Dirty Water Tank
Incorrect cleaning formula
Only use BISSELL® portable machine formulas (with
BISSELL Boost if desired)
Troubleshooting
Below are some of the issues you may run into. If you don’t see the issue you’re experiencing
below, visit
BISSELL.com
.