8
BISSELL.com
1.
Turn OFF your machine.
Remove the Dirt Tank from the
hand vacuum by sliding the
latch on the front of the tank.
2.
Grab the top of the tank
and pull up. This will activate a
wiping feature to remove debris
from the mesh filter screen.
3.
Fully remove the separator
from the tank and tap the
mesh screen on the side of the
trash bin.
4.
Dump dirt from the tank
into the trash bin.
5.
Slide the separator back
into the tank, ensuring the
notch is seated into the tank
correctly.
6.
Put the whole tank into
the hand vacuum by guiding
the notched out area on the
bottom of the tank onto the
hook on the hand vacuum.
Push into place.
Emptying the Dirt Tank
More of a video person? Go to
support.BISSELL.com
for additional how-to videos.
WARNING
»
Before using your vacuum, make sure that the Dirt Tank is in locked position and that all fi lters, both pre and post-fi lters, are in
place. DO NOT operate your vacuum without these fi lters.
Removing and Changing the Brush Roll
Go to
support.BISSELL.com
for a full list of maintenance and troubleshooting support.
1.
Turn the machine OFF and
press the Foot Release Button
to disconnect the Motorized
Floor Cleaning Foot from the
Extension Wand.
2.
With a flathead screwdriver
or coin, twist the slot on the
side of the foot clockwise and
pull the Brush Roll out.
3.
To use the hard floor brush
roll or replace the brush after
cleaning it, push the brush roll
back in the chamber and twist
counter-clockwise with a tool
or coin to lock in place.
1
2
