5
Assembly
Operations
The Hard Floor Expert is shipped in three pieces:
Upper handle, Body, Foot
No tools are required for assembly.
1.
Slide upper handle into body and push in
firmly until handle locks into place.
2.
Slide foot onto body of unit until foot
locks into place.
3.
Wrap power cord on back of unit.
Transporting unit
Place unit in upright position and tip back
to roll on rear wheels.
Power switch
The power switch is located on the top of the
body of unit.
Push switch ON (l) to vacuum and OFF (O)
when cleaning is complete.
1.
Turn quick release cord wrap to remove
power cord; plug into electrical outlet.
2
Lightly press the foot of the vacuum and
pull handle back to detent.
3.
Turn power switch to ON (I) position
4.
Clean your hard floors, under cabinets, and
easily maneuver around furniture. To clean
along edges, align the end suction points
along the areas you want to clean.
5.
When finished cleaning, turn power switch
to OFF (O) position.
6.
To store the unit, return handle to upright
position.
WARNING
Do not plug in your vacuum cleaner until
you are familiar with all instructions and
operating procedures.
www.BISSELL.com
1.
2.
3.
1.
4.
2.
Power
Switch
Содержание Hard Floor Expert 81L21 SERIES
Страница 1: ...HARD FLOOR EXPERT USER GUIDE 81L21 SERIES...
