7
Problem
Possible causes
remedies
motor not
operating
Check that the plug is connect to
the socket securely
Re-plug
Weakened
suction power
Full dust cup
empty dust cup
Dusty filter(s)
Check and clean or replace filters
Clog in the hard floor tool or hose
Follow instructions
e3
on page 6 for
cleaning the hard floor tool.
Variable suction set to the
lowest speed
slide the dial towards the “+” to dial
up the suction
Power cord
cannot be
rewound
completely
The power cord may pile on
one side of the coiler
Pull out a large section of the
cord and rewind it
Power cord
cannot be
pulled out
Power cord may be twisted
Press the ReWiND button and rewind
or pull out the cord repeatedly
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a bissell product.
for any questions or concerns, Bissell is happy to be
of service. contact consumer care listed on page 8.
Please do
not return
this product
to the store.
Troubleshooting
Warning
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical socket before
performing maintenance or troubleshooting checks.
pArt # pArt nAme
pArt #
pArt nAme
160-2330
Handle Assembly
160-2084
Pre-Motor Filter / Pleated Filter
160-2085
Pre-Motor Filter / Foam Filter
160-2094
Post-Motor Filter
160-2086
Post-Motor Filter / Unwoven Cloth
160-2088
Dirt Tank
Accessories
These items are available for purchase as accessories for your BISSELL vacuum:
To purchase visit www.BISSELL.com.
pArt # pArt nAme
pArt #
pArt nAme
160-2089
Carpet Tool
160-2090
Hard Floor Tool
160-2091
Telescopic Extension Wand
160-2445
Crevice Tool
160-2060
Upholstery Tool
