5
6
Bottom View
Rotating Brush
Dust Blade
5
Assemble the Handle by screwing together two (2)
pieces of the Metal Extension Handle. To lengthen, use
all three (3) pieces of the Metal Extension Handle. Place
the colored Handle Grip on top of the metal extension
assembly and twist clockwise until secure. Screw the
D-shaped End into the bottom of the Metal Extension
Handle assembly.
Place bottom D-shaped End into the D-shaped open-
ing at the top of the GoVac. Push firmly until the but-
ton at the bottom “clicks” into place in the opening.
The GoVac must be fully charged before using. To
charge the unit, plug the DC Adapter into a standard
electrical outlet (120v-60hz); plug the opposite end into
the port on the Motor side of your GoVac. The GoVac is
now charging.
Charging Cord with DC Adapter Plug
- DC Adapter
plugs into standard electrical outlet (120v - 60hz);
plug opposite end into port on Motor side of GoVac.
Dust Cup
- Press and turn to securely lock.
Washable Filter
- Fits inside Dust Cup.
Metal Extension Handle
(five pieces).
Rotating Brush
.
Dust Blade.
When completely charged, the GoVac provides over 12
minutes of full cleaning power.
When charging for the first time, allow to charge
uninterrupted for at least 24 hours. Thereafter, a 12 -16
hour charge will renew the GoVac battery.
Decreased operating time may indicate the battery has
built up a charging resistance. To recharge, first completely
exhaust the battery, recharge it, then exhaust it again before
recharging a second time. This procedure may be required
more than once.
When not charging, be sure to unplug the GoVac from
the charger.
1.
2.
3.
Quick and Easy Assembly
Plug into Port
on the Motor
side of the GoVac
Charging Cord with
DC Adapter Plug
1.
Components
2.
3.
1
2
3
4.
5.
6.
4
Charging the Battery
1.
2.
3.
4.
