Bissell DEEPCLEAN PREMIER 36Z9 Series, Руководство пользователя

Страница: 13 / 16

13
www.BISSELL.com
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing maintenance
or troubleshooting checks.
Problem Possible causes Remedies
Reduced
spray or
no spray
2-in-1 Water Tank may be empty. Fill heavy-duty bladder with hot
tap water.
Tank may not be seated
completely.
Turn power OFF. Remove and
reseat tank.
Pump may have lost prime. Turn power OFF and then back ON.
Wait one minute, then press trigger.
DirtLifter®
PowerBrush
does not turn
The belt is off or broken. Turn power OFF and unplug machine
from outlet. Follow instructions on
page 12.
Circuit breaker on machine may
have tripped.
Turn the machine OFF and unplug
from outlet. Check to see if foreign
object is caught in Brush Roll.
Remove object. Plug machine in to
reset circuit breaker.
Cleaner
not picking
up solution
2-in-1 Tank may not be seated
properly.
Pick up and reseat the tank.
Tank may not be assembled
properly.
Make sure the tank latches on both
sides of the tank are latched properly. To
make sure they are both latched prop-
erly, pick the tank up by its handle.
2-in-1 Water Tank is empty. Check fluid levels in heavy-duty
bladder.
2-in-1 Water Tank has picked up
maximum dirty water and red
float door has closed.
Empty tank. Refill heavy-duty bladder
with clean hot tap water and replace.
Red float "door" in the tank may
have closed as a result of bump-
ing object or moving machine
back and forth too quickly.
Turn the machine OFF , allowing red
float door to release an into the open
position. Turn machine back ON to
continue cleaning. Be sure your
forward and backward strokes are
done at a slower pace.
Red lint screen near air duct
is dirty.
Follow cleaning instructions on page 9.
Troubleshooting