1.
Slide handle assembly onto
lower body and secure with two
long screws.
2.
Attach upper hose rack to back
of handle assembly by guiding
the hook up into slot location and
pressing firmly upward until it is
seated flush with the back of the
machine. Secure 1 short screw
through the hole in the bottom
of the upper hose and cord rack.
3.
Attach lower hose rack by
guiding the hook up into slot
location and pressing firmly
upward until it is seated flush
with the back of the machine.
Secure 2 short screws through
holes on either side of the
bottom hose and cord rack.
4.
Attach Tough Stain tool to
end of hose.
5.
Wrap flex hose around hose and
cord rack (as shown) and secure
it into notched out holder. Wrap
cord around opposite side of hose
and cord rack.
6.
Place tank in the bottom of
the machine.
Your aSSEmBLY IS now ComPLEtE.
For complete user's guide, visit www.BISSELL.com
1.
Move furniture to another area
if cleaning an entire room
2.
Remove large dirt and debris
from carpet (See User’s Guide for
more details)
3.
Pre-treat spots & stains and
heavy traffic areas (optional –
see User’s Guide)
4.
Fill the clean water tank
4a.
Unlatch the top by lifting up on
the latch at the back side of the tank.
4b.
Remove the top
4c.
Fill with hot tap water leaving
space at the top for formula (do not
boil or microwave water). Pour 2.5
ounces of formula into the heavy duty
bladder (fill the included measuring
cup to the indicated fill line).
4d.
Re-attach top by hooking the
front of the lid in then locking in the
latch on the back side of the tank.
5.
Plug into outlet, and turn the power
switch on
notE: Heatwave technology™ helps
keep hot water hot while the machine
is in use. Simply turn the machine on
to activate Heatwave technology.
Before you begin cleaning
Assembly
1.
1b.
2.
3.
5.
5.
4c.
4b.
4d.
