global.BISSELL.com
13
5
4
3
1
Cleaning the Brush Roll and Chamber
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
2
Grasp Brush
Roll Window
on the front
of its face and
pull upward to
remove.
With warm water, rinse
your Brush Roll Window
and Brush Roll.
Pull Brush Roll
out by grabbing
the Brush Roll
tab and pulling
upward.
If your Brush Roll
chamber is dirty, clean
with a rag or towel.
Let your Brush Roll and
Brush Roll Window
chamber dry before
reassembling.
6
7
Replace the Brush Roll Window by
first lining up both window tabs with
the edges of the foot. Then press the
window back into place until you hear
a “click”.
Replace Brush Roll by inserting the
Brush Roll end into the right side of the
foot. Then lock the pull tab into place by
pressing downward.
TIP:
Running your machine with a wet Brush Roll will help the Brush Roll dry faster. The
trigger should not be pressed.
NOTE:
The Brush Roll is not dishwasher or automatic washing machine safe. Please
follow cleaning instructions above.
