Bissell CROSSWAVE 1713Z, Руководство пользователя

Страница: 7 / 24

www
.
BISSELL
.
cn
7
EN
Cleaning Hard Floors & Area Rugs
Recline the body of the machine
backward to start the brush roll spinning.
To stop the brush roll spinning, you will
need to stand the machine upright.
Select cleaning
mode:
To start
cleaning, turn the
machine ON in the
HARD FLOOR or
AREA RUG
setting.
Once the setting
is selected, the dry
vacuum will turn on.
To turn OFF, press
the HARD FLOOR or
AREA RUG setting a
second time.
Before each use, hold
the solution spray
trigger for 10 seconds to
prime the system with
cleaning solution. LED
lights illuminate when
holding the trigger.
NOTE: When solution
is flowing, you will see
bubbles forming at the
edges of the brush roll
window.
To clean, hold the solution
spray trigger to apply
solution on both forward
and backward passes.
NOTE: Hold machine over
stuck on messes while
holding the trigger for best
results.
For overly challenging and
stuck-on messes on your
hard floors, activate the
RUG
mode and hold your
CrossWave ™ over the mess.
Using short passes while
holding the trigger allows
the multi-surface brush to
go to work.
To dry area rugs faster, run
the machine over your area
rug without holding the
trigger.
1 2
3
4 5
NOTE:
Before you begin, plug the machine into a properly grounded outlet.
NOTE: Before cleaning area rugs, test an inconspicuous area of the rug for
colorfastness. Also, please check manufacturer’s tag before cleaning area rugs for
any specialised cleaning instructions. Not for use on silk or delicate area rugs.
NOTE:
The RUG button
dispenses twice the
solution of the HARD
FLOOR button to help
with area rug cleaning.
ATTENTION
Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs.
Stalling the brush may result in premature belt failure.