7
clearing clogs from the dirt cup
1.
Unplug the vacuum from electrical outlet.
2.
Remove the dirt cup from the vacuum,
following steps 1-3 of emptying the dirt cup
on page 6.
3.
Remove the dirt cup filter assembly from
the dirt cup, following step 2 of Clean the
dirt cup filter on page 6.
4.
Tap the dirt cup filter assembly over a
garbage container to remove any dirt or
debris from the cyclone screen that sur-
rounds the dirt cup filter.
5.
Reach up into the dirt cup to clear any dirt
or debris from the dirt cup.
6.
Check to see if there are any clogs
in the suction inlet.
7.
After clearing any dirt or debris from
the dirt cup, replace the dirt cup filter
assembly back in the dirt cup following step
8 of Cleaning the dirt cup filter on page 6.
maintaining the pet
turbobrush
™
tool
The Pet Turbobrush™ Tool should be
checked regularly for clogs or debris wrap-
ping around the brush.
1.
Unplug the vacuum from the outlet.
2.
if the clog is present or debris is vis-
ible, turn the collar on the neck of the Pet
Turbobrush™ Tool counterclockwise to the
unlocked position to remove the faceplate
and clear any obstructions.
3.
To clean debris from the brush, remove
the brush from the drive belt and clean
debris.
4.
Reposition the drive belt on the brush.
Place the ends of the brush in the slots on
the sides. Reposition the faceplate and turn
the collar clockwise to the locked position.
Replacement Parts
These items are available for purchase as accessories for your BISSELL vacuum:
To purchase visit www.BISSELL.com.
pArT # pArT nAme
pArT #
pArT nAme
203-1771
Dirt Cup Filter Screen
203-1772
Dirt Cup Filter
203-1786
Post-Motor Filter
160-3821
Floor Nozzle
203-1537
Hose with Handle
203-1538
Extension Wands (2)
203-1539
Combination Crevice Tool/
Dusting Brush
160-3063
Pet TurboBrush™ Tool
