www.BISSELL.com
8
WARNING
To reduce the risk of electrical shock, turn Power Switch OFF and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
Cleaning the Pre-Motor Filter
Remove the bag door
cover by pressing the
latch down and pulling
the door off.
Remove the pre-motor
filter. Clean it with warm
water. Once it’s clean and
dry, put it back into the
unit.
WARNING
Do not operate the vacuum with damp or wet filters, without the bag in place, or with the
bag door missing. Allow components to dry before reassembling the unit.
Locate the filter on the left
side at the bottom of the
bag compartment. You may
need to lift the bag out of
the way to find it.
1
3
2
Cleaning Tips
Easily carry the vacuum up and down stairs
or from room to room using the vacuum
Carry Handle. The vacuum Carry Handle is
located on the front of the vacuum above
the vacuum bag latch.
While vacuum is in use, fasten the
Power Cord to the Cord Clip located on
the back of the handle above the Hose
Clip. This will help to keep the cord out
of your way as you vacuum.
1
2
