w w w . b i s s e l l c o m m e r c i a l . c o m 8 5 5 . 5 4 4 . 7 3 3 6
O
perations
6
Carpet cleaning continued
7. Cleaning strokes
. Release the trigger
and make one slow forward and back-
ward pass over the same area to remove
any residual dirty water and aid in drying.
Repeat cleaning passes until solution being
pulled up appears clean. continue passes
without pressing the trigger until you can’t
see any more water being pulled up.
8.
Remove the dirty water tank by pulling the
handle to the upright position and lift up. carry
the tank like a bucket to a utility sink or outside
where you will dispose of the dirty water.
9.
unlatch the top of the tank from the bottom by
pushing the handle all the way forward and
lifting the top off. pour dirty water into the sink.
Note: You may notice hair and debris
deposits on the carpet or in the tank
that were loosened by the cleaning
action (especially with newer carpets
that have never been deep cleaned
before). This debris should be picked
up and thrown away.
10.
fill the clean water tank with clean hot tap
water and follow instructions 2 - 7 to
continue cleaning.
Machine storage
Once your cleaning is complete, make
sure both the dirty and clean water
tanks are emptied, rinsed out and dried
before the next use.
Note: Store cleaner in a protected, dry
area. Since this product uses water, it
must not be stored where there is a
danger of freezing. Freezing will dam-
age internal components and void the
warranty.
9.
8.
9.
CAUTION:
Do not overwet. Take care not to
run over loose objects or edges
of area rugs. Stalling brush may
result in premature belt failure.
M
aintenance and care
