www.BISSELL.com
10
Bathing Your Dog (continued)
Prime the system by pointing the nozzle
at the microfiber mat and pressing
and holding the spray trigger for 15-20
seconds to allow solution to dispense.
Set the Rinse/Shampoo switch to the
desired setting. For Shampoo, the reservoir
will dispense a mixture of shampoo and
water; for Rinse, it will dispense just water.
9
Press and hold the spray
trigger while gently stroking
the nozzle of the bathing
tool downwards, following
the fall of the dog’s coat.
Spray shampoo/water on the microfiber
towel and hand clean delicate areas such
as the dog’s face and paws.
8
Release the spray trigger
and use “drying strokes”
to suction up moisture
from the dog’s coat.
Repeat as needed.
As a final step, coat should be air-
or towel-dried as needed.
NOTE:
The Dog Bathing Tool is always extracting dirty water. The trigger
dispenses the shampoo and/or water. While pressing the trigger, it also continues
extracting dirty water.
5
10
6
Place the tool directly
onto the dog’s coat before
pressing and holding the
spray trigger to release
the shampoo/water onto
your dog’s coat.
7
11