20
w w w . b i s s e l l . c o m
T
roubleshooting (Continued)
Cleaner not picking up solution
Possible Causes
Remedies
1
. Ready Tools dial may be at wrong setting.
1
. Set Ready Tools dial to either
floor cleaning or hose
attachments
setting.
2.
2-in-1 water tank may not be seated properly.
2.
Pick up both the 2-in-1 water
tank and formula tank and
reseat them so they fit snugly on
the
unit.
3
. 2-in-1 water tank may not be assembled properly.
3
. Check to make sure the "lip" of
the nozzle is securely hooked
into the groove on bottom of
2-in-1
water
tank (see page 9).
4.
Formula or 2-in-1 water tank is empty.
4.
Check water levels in heavy duty
bladder and formula tank.
5.
2-in-1 water tank has picked up
5.
Empty 2-in-1 water tank. Refill
maximum dirty water and red float
heavy duty bladder with clean
door has closed.
hand hot tap water and replace.
6.
Red float "door" in the tank may have closed
6.
Turn the machine
OFF
(
O
),
as a result of bumping an object or moving
allowing red float door to release into
machine back and forth too quickly.
the open position. Turn unit back
ON
(
I
) to continue cleaning. Be
sure your forward and backward
strokes are done at a slower pace.
ug310-5880_9200E_406.indd 20
ug310-5880_9200E_406.indd 20
6/9/06 4:25:47 PM
6/9/06 4:25:47 PM
