5
BISSELL.com
Getting ready
1.
To fill the clean water/solution tank
a.
Remove the tank by lifting it straight up and
away from the unit.
b.
Pull on the black tab to reveal tank opening. The
plug rotates out of the way for easy filling.
c. FOR LARGE AREA:
Follow the fill lines on your
clean tank to add the correct amount of hot tap
water (140°F/60°C MAX), portable machine formula,
and 1oz of BISSELL Boost.
FOR SMALL AREA:
Follow the fill lines on your clean
tank to add the correct amount of hot tap water
(140°F/60°C MAX), and portable machine formula.
DO NOT BOIL OR MICROWAVE WATER.
d.
Replace the plug by rotating into place and
pressing gently onto tank.
e.
Replace the tank by lining up tank bottom with
indentations on machine. Press down firmly on tank
to secure in position.
2.
Release the flex hose from the hose grip bracket.
Unwrap flex hose completely from around the unit.
3.
Select desired tool for spot cleaning. Insert tool on
end of hose until it clicks into place.
4.
Twist the Quick Release™ cord wrap clockwise to
unwrap the power cord completely.
Pre-treating
Cleaning effectiveness will be enhanced if you pre-treat
heavily stained or highly soiled areas. Here’s how:
1.
Attach the Small Tough Stain Tool to the handheld
cleaning hose.
2.
Plug in the unit and press the power button beneath the handle to turn it on.
3.
Hold the Small Tough Stain Tool just above the carpet or upholstery to be cleaned. Press
the trigger to mist solution over the soiled area.
4.
Wait 3-5 minutes before cleaning.
Cleaning with tools
1.
Attach the tool to the end of the cleaning hose (tools vary
by model).
2.
Plug in the unit and press the power button beneath the
handle to turn it on.
3.
Hold the tool 1 inch above soiled surface.
4.
Press the spray trigger to mist solution over and onto the
soiled area.
5.
Release the spray trigger and gently scrub the stain.
6.
To lift the stain away, apply downward pressure on the tool and slowly pull it toward you.
Watch as powerful suction removes the dirt and cleaning solution. Continue until no more dirt
can be removed.
7.
As a final step, use “drying strokes” (by not pressing the spray trigger) to remove as much
moisture as possible. Repeat this step as often as necessary.
NOTE: Oxy Boost formula will continue to clean oxidizable stains for 6-8 hours.
Operations
1a.
1b.
1e.
3.
4.
WARNING
Keep spray away from face. Failure to do
so may result in personal injury.
IMPORTANT
Check the manufacturer’s tag before
cleaning upholstery. “W” or “WS” on the tag
means you can use your SpotClean. If tag
is coded with an “S” (with diagonal strike-
through), or says “Dry Clean Only,” do not
proceed. If manufacturer’s tag is missing or
not coded, check with your furniture dealer.
Содержание 4720 SERIES
Страница 1: ...SPOTCLEAN PROFESSIONAL 4720 SERIES...
