w w w. b i s s e l l . c o m
M
aintenance and care
14
Machine storage
Once your cleaning is complete,
make sure the dirty water from the
collection tank is emptied. Rinse
out and dry before the next use.
For wet cleaning, the solution tank
can be left filled and ready to use.
Note: Store your Healthy Home
PROheat All Rounder in a protected
dry area. Since this product uses
water it must not be stored where
there is a danger of freezing.
Freezing will damage the internal
components and void the warranty.
Machine care
For best results, a few simple steps
can assure your machine is well
maintained after your cleaning is
complete.
1.
Press all buttons OFF. Unplug the
machine and wrap the cord.
2.
After emptying the dirty water from the
collection tank, rinse it out thoroughly
with hot water. Remove all inner parts
(water filtration tower and mode selec-
tor) if desired. Rinse them and allow to
dry before returning into tank.
Note: To remove inner parts, turn
mode selector to remove. Pull
mode selector straight out towards
you. The water filtration tower can
now be taken out through the top
of the tank.
3.
For wet cleaning, remove and clean
all tools that were used. Allow to dry
before storing.
4.
Remove the hose, taking care to keep
both ends up to avoid spilling. Dump
out any remaining water and flush
clean with hot tap water. Allow to dry
before storing.
WARNING:
To reduce the risk of fire and
electricshock due to internal com-
ponent damage, use only BISSELL
cleaning formula intended for use
with the deep cleaner. Non-BISSELL
cleaning formula may harm the
machine and void the warranty.
Water
Filtration Tower
Mode Selector
