www.BISSELL.com
12
www.BISSELL.com
13
WARNING
This product contains lithium-ion rechargeable batteries. According to
Federal and State regulations, removal and proper disposal of lithium-ion
batteries is required. For removal of the batteries in your Pet Stain Eraser,
see instructions on this page.
Disposal of Batteries
NOTICE:
Disconnecting the battery will destroy the appliance and invalidate the
warranty.
Remove the screw near the LED window
using a Phillips-head screwdriver. Then,
remove entire top handle portion from
unit by using a flat-head screwdriver.
Remove the cover on the base of the
unit by using a flat-head screw driver.
1
Remove product rating label. Pull open
the housing on the base of the unit in
opposite directions. Disconnect and
remove the entire battery assembly.
Using a
Phillips-head screwdriver
,
remove seven screws in the locations
referenced in the image.
4
NOTE:
Keep Battery Pack together – DO NOT separate individual batteries.
For specific disposal instructions of batteries, please contact the RBRC
(Rechargeable Battery Recycling Corporation) at 1-800-822-8837
or visit www.Call2Recycle.org.
3
2
Before proceeding, ensure that:
-the unit is disconnected from the charger
-the Clean Water Tank, Dirty Water Tank, Nozzle and brush have been removed
from unit (see removal instructions on pages 10-12)
-you have a flat-head and Phillips-head screwdriver, required for disassembly
Clean the Brush
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from
charger before performing maintenance or troubleshooting.
Rinse brush with clean water and check
brush for debris. Once cleaned, insert
brush by aligning the top of the brush
into the unit and snap into place. Ensure
it is secure before using.
Ensure the unit
is OFF and set
upright on a
countertop or flat
surface. Remove
the Scrubbing
Brush by lifting the
tab up and pulling
gently to release.
2
Clean the Window Tool
(select models)
Rinse tool under water and let air dry.
Remove Window
Cleaning Tool by
pushing the tab upward
on the back of the unit
and pulling gently.
1
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from
charger before performing maintenance or troubleshooting.
2
1
