your
deep cleaner assembles quickly and
easily. the only tool you will need for
assembly is a phillips head screwdriver.
1.
Locate the screw pack, which is taped
to the upper handle.
2.
Slide the upper body onto the lower
body, taking care not to leave a gap
between the upper and lower body.
3.
firmly holding the upper body, screw the
2 screws into the holes marked with arrows.
tip:
If you are having difficulty tightening the
screws, remove, re-insert, and tighten again.
4.
After tightening the screws, ensure proper fit
between the upper and lower body by trying
to separate the two. If assembled properly,
there should be no gap. If a gap appears
between the two (see picture at right), continue
to tighten the screws until no gap is present.
5.
Slide upper handle into upper body by
aligning the pin and sliding into place.
note: be sure to secure upper
handle before lifting. Rotate handle
lock clockwise to secure.
6.
Place solution tank on back of unit.
7.
Wrap power cord.
assembly is now complete.
special features
Your BISSELL CleanView Compact
Performance is a home cleaning system
that uses a combination of hand hot tap
water, BISSELL cleaning formula, brush
agitation and suction to safely clean carpets.
dirtlifter™ powerbrush
The DirtLifter PowerBrush is designed to
enhance cleaning performance. The bristle
pattern safely lifts out the deep down dirt while
gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights.
When the power is oN and the machine is in
the upright position, your carpet is protected
because the brush is lifted up off the carpet.
w w w. b i s s e l l . c o m
A
ssembly
5
O
perations
WaRning:
To reduce the risk of fire, use only
BISSELL deep cleaning formula for
full size machines in your deep
cleaner. Use of cleaning formulas
that contain lemon or pine oil may
damage this appliance and void
the warranty. Chemical spot clean-
ers or solvent-based soil removers
should not be used. These products
may react with the plastic materials
used in your deep cleaner causing
cracking or pitting.
2.
5.
6.
3.
pin
coRRect
incoRRect
4.
