Bissell 2066 Series, Руководство пользователя

Страница: 16 / 20

www.BISSELL.com
16
Replacing Belts & Brush Rolls
What you will need: 1 Phillips screwdriver & 1 flathead screwdriver
Use a flathead
screwdriver and
press it into
the Belt Access
Door slot. Lift to
remove the Belt
Access Door.
While the machine is upright, unplug the machine and remove both tanks. Remove
the nozzle and brush chamber cover (see steps in Brush Roll & Nozzle Care). Press
the recline pedal and lay the machine on its back.
With the machine
still on its back,
use a Phillips-head
screwdriver to
remove the screw
on the brushroll
end cap.
If the Gear Belt
is broken, gently
remove it. If you
are replacing your
brush rolls, gently
remove the belt.
There are washers
at the ends of the
brush rolls, be
careful that these
do not fall off or
get lost.
1
3
6
7
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
With the machine laying on its back,
locate the belt access plate. Use a
Phillips-head screwdriver to remove the
belt access plate screw.
Remove the Belt Access Plate.
4
5
2