www.BISSELL.com
8
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
Cleaning the Pre-Motor Filter
Remove the
bag door cover
by pressing
the latch down
and pulling the
door off.
Remove the pre-motor
filter. Clean it with
warm water. Allow it to
dry completely.
WARNING
Do not operate the vacuum with damp or wet filters, without the bag in place, or with the
bag door missing. Allow components to dry before reassembling the unit.
Locate the filter
on the left side
at the bottom
of the bag
compartment.
You may need to
lift the bag out of
the way to find it.
1
3
2
Once it’s clean and
dry, put it back into
the unit.
4
Helpful Tips
Easily carry the vacuum up and down stairs
or from room to room using the vacuum
carry handle. The vacuum carry handle is
located on the front of the vacuum above
the vacuum bag latch.
While vacuum is in use, fasten the
power cord to the cord clip located on
the back of the handle above the hose
clip. This will help to keep the cord out
of your way as you vacuum.
1
2
