w w w. b i s s e l l . c o m
M
aintenance and care
8
disposal of batteries
if your Pet Hair eraser Hand Vac
is to be disposed of, the batteries
should be removed and disposed
of properly.
1.
imPoRtant:
Remove from charging base and fully
discharge hand vacuum.
2.
Remove dirt container from handle.
3.
Remove (6) Phillips head screws on
the handle and cover.
4.
Separate left and right cover.
5.
Remove the entire battery assembly
from the cover.
6.
Remove (3) Phillips head screws
between the motor and battery bracket.
7.
Pull the motor, PCB, fuse, and inner
wire through the middle of the battery
bracket, separating the battery bracket
and both batteries from the motor, PCB,
and inner wire.
8.
Cut wires from the PCB and fuse to the
battery bracket.
9.
Keep battery pack together – DO NOT
separate individual batteries. For spe-
cific disposal instructions, please contact
your local authorities for requirements
and regulations on safe disposal or
recycling facilities in your area.
10.
Discard remainder of product
caution:
Disconnecting the battery
will destroy the appliance and void
thewarranty.
3.
6 screws
WaRning:
This product contains a
rechargeable nickel metal
hydride battery (sometimes
referred to as a “NiMH” bat-
tery) pack. The average life of
a NiMH battery is 5 to 7 years,
depending on frequency of use.
Proper removal and disposal of
NiMH batteries is required.
