6
O
perations
Power Switch
The power switch is located on the left
side of the vacuum. Push the rocker
switch “ON” (1) to vacuum and “OFF”
(O) when cleaning is complete.
Handle Positions
Press the handle release pedal, located
on the lower left side of the vacuum,
with your foot to place your vacuum
into one of three cleaning positions.
1.
Upright: f
or storage and above
floor cleaning with tools.
2.
Normal Cleaning: press handle
release pedal once. Position used
for most household floor cleaning
tasks.
3.
Low Cleaning:
with the vacuum
in normal cleaning position, press
handle release pedal again. Use for
reaching under low furniture such as
tables, chairs, and beds.
Pet Hair Lifter
Use to pick up pet hair from carpeted
surfaces. Just vacuum like you normally
would. The Pet Hair Lifter will grab
pet hair when you pull back and it will
release hair and suction it up when you
push forward.
Transporting cleaner
To move your cleaner from room to
room, put the handle in the upright
position, tilt the cleaner back on its
rear wheels and push forward.
The cleaner can also be moved by
using the carry handle.
Pet Hair Lifter
CAUTION
:
Before using your vacuum make
sure that the dirt container is in
locked position and that all filters
(HEPA Media Filter* and foam filter)
are in place. Do not operate your
vacuum without these filters.
*The filter media, not the vacuum as a whole,
complies with IEST-RP-CC001.5 HEPA standard.
