www.BISSELL.com
8
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
Maintenance:
Cleaning the Dirt Container & Filters
Maintenance:
Emptying the Dirt Container
1
2
Press Empty
Button
Pull handle
to push Dirt
Container away
from vacuum
Holding Dirt Container over a trash bin,
press Release Button on back.
Snap bottom back into place
Press
Release
Button
Pull
Press to Release
2
Press Empty
Button
and pull
away from
vacuum.
Twist top
right to
separate.
When reassem-
bling, place last
and twist left.
Twist
Press
PO
WERGLIDE
Rinse and dry all sections
of dirt container with
paper towel.
PO
WERGLIDE
Place dry pre-motor filters back
on top of dirt container with
black tabbed side on top. Place
post-motor filter back to bottom
front of vacuum and snap filter
cover door back on.
5
6
Remove pre-motor filters
and check for dirt on BOTH
sides. Separator Screen can
be rinsed and dried as well.
With dirt container removed,
press red release button to
access post-motor filter.
Clean all filters with mild
detergent, rinse, and squeeze all
excess water. Allow filters to dry
completely before reinserting.
Pre-Motor
Filters
Checked pattern
when filter bottom
is dirty
Post-Motor
Filter
1
Pre-Motor
Filters
Checked pattern
when filter bottom
is dirty
Separator
Screen
4
3
