Revision 2.0
Figure 8: Define the orientation of the sensor housing by marking both the assembly and declination
axis.
Once all four homing sensor mounting screws are removed, the next step is to remove the
homing sensor assembly from the mount. The assembly fits very snugly and can be
difficult to remove.
Do not pull in the homing sensor wiring to remove the homing sensor housing!
Insert the end of the needle nose pliers and orient them parallel with the long axis of the
oval hole in the homing sensor housing. Use
outward pressure
on the needle nose pliers
to capture the homing sensor housing (Figure 9) and extract it.
Mark the orientation of
the sensor housing in the
declination axis.
