Bisonte AS-501, Руководство пользователя

Страница: 58 / 66

8.Blower function (figure 8)
(1)Insert the hose to the blowing part .
(2)Use the hose blowing the area .
9. Reverse wind function (figure 9)
(1)When the suction is lower, use the head of hose press the button.
(2)Repeat press three to five times, increase the suction.
10. Dust bag assemble (figure10)
(1)Take off the transparent cover.
(2)Install the dust bag on the cover,then assemble to the machine.
11. Dust bag replace (figure 11)
(1)Take off the transparent cover including the dust bag
(2)Use new dust bag instead of old one
12. Cover separate from tank (figure 12
）
(1)Open the 2 sides clamps.
(2)Holding the handle and take out the cover.
13. Filter replacement (figure 13)
(1) Take out cover, the dirty filter is in the bottom,
take out the filter.
(2) Use new filter instead of old one, then
assemble.
14. Filter clean (figure 14)
(1)Take out the filter and use water clean
(2)After clean, keep the filter dry, then reuse
15. Connectors clean (figure 15)
(1)Take off the connectors from cover, use water
clean
(2)Assemble the connectors and keep it tight
16. Adding water control (figure 16 ）
(1)Take off the cover from vacuum body, pull
water into the tank
(2)Please note the “water level”, avoid adding too
much
17. Speed controller operation (figure 17 ）
(1)Speed controller above the switch
(2)Speed controller turn left, the suction turn down.
Speed controller turn right, the suction turn up.
Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
58