6
1.
Remove tension from both nets with the winches.
2. Use the net height adjustment crank to adjust the net that will be at men height.
3. Attach the top net rope to the hook on the center pole for women net height.
4. Use the net height adjustment crank to adjust the lower net court winch pole and tighten the winch.
See Figure 7.
5. Adjust all bottom
Collar Straps
(J)
1”
-
2”
below net, reattach and tension both bottom ropes.
6. Attach all
Rope Ratchet Net Tensioning Ropes
(H) per previous instructions.
7. Depending on height of lowest net use the
3/16”
Allen Wrench
(M) to move the winch above the
Collar
Strap
(J). On multiple side by side court systems the winch on the court adder poles should be placed
above the collars so web strap will not interfere with bottom rope attachment.
8. If you wish to install side by side nets at different heights other than men and women, use the extra
Collar Straps
(J) provided to attach the top rope on the lower net court.
1.
If you have purchased the
Standards
(A), for use in existing sockets that are not
3”
diameter call your
dealer for custom floor socket sleeves available at no additional cost. You will need to provide the inside
diameter of the floor socket and the depth of the socket from the playing surface to the bottom.
2.
If the Adapter Sleeves fit loosely in the floor sockets they can be shimmed with thin metal strips or layers
of duct tape can be wrapped around the outside of the sleeve at the top and the bottom until sleeve is snug
inside the existing floor sockets.
3. If your pre
-
existing floor sockets are more than 10
”
deep from the finished floor to the bottom of the socket
call your dealer for information on the Deep Socket Adapter Kits available at no additional cost.
Custom Floor Socket Sleeves & Deep Socket Adapters
Height Adjustment for a Side by Side Court System with nets
at Men and Women.
37' CENTER TO CENTER
37' CENTER TO CENTER
MEN'S HEIGHT
WOMEN'S HEIGHT
Figure 7
Содержание VB7000
Страница 7: ...7 Court Diagram...
