background image

—— Instruction Manual —— 

VB25FL 

Drill In Floor Anchor For Use In Floating Wooden Floors 

Date: 

8/9/18       

Rev:  

5

          B.A.               N.J.C.                 File:

\ I:\Publisher\Instructions\volleyball             

    Ref#: 960971 

Customer Service     

(800) 247-7668 

INSTALLATION OPTION USING EXPANDING CONCRETE ANCHORS 

IMPORTANT NOTE: 
1.  Pilot drill a 7/8” diameter hole through floor structure. Then use a 7/8” carbide tipped drill to extend the hole at least 2 9/16”  into 

the concrete. 

2.  Open up hole in floor structure to 1 1/2” diameter, then route a hole 2 3/4” diameter by 3/8” deep at the top for the threaded    

insert.  Use caution so that the top of the insert is not below the floor level.  If possible, route the hole at least 1/16” diameter 

Отзывы: