1
BA873
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦
Read all instructions before proceeding.
—— Instruction Manual ——
Installation Instructions for the Fixed Height Ultimate Series
42” x 72” Glass/Polycarbonate Backboard
Date: 7/24/07 Rev: 1 B.A. N.J.C. File:://publisher/instructions/873.pub Ref#:940351
Customer Service
(800) 247-7668
1. Remove
the
3/8” Hex Nuts
(B),
3/8” Flat Washers
(C) and
3/8” Lock Washers
(D) that are factory
installed on the
BA42RG/BA42RU BackBoard
(A) assembly.
2. Align
BA42RG/BA42RU Backboard
(A) with the holes in the backboard mount plate on the extension
arm and slide threaded studs through the holes as shown in the illustration on page 2.
3. Reinstall
3/8” Hex Nuts
(B),
3/8” Flat Washers
(C) and
3/8” Lock Washers
(D) to the threaded studs.
(Bottom
mount
position will only accept the
3/8” Hex Nut
(B) and
3/8” Lock Washer
(D) due to space
constraints.)
4. Install rim through holes with spacers using the hardware provided with the rim. Tubular backboard
spacers are to be left in place to support the rim.
Warning!!!
The
Extension Arm
is EXTREMELY heavy!Stay Away from the area Below the
Extension Arm
/
Backboard
while installing or adjusting!
Serious injury or death may occur.
P A R T S L I S T
Item
Qty
Description
Item
Qty
Description
A
1
BA42RG / BA42RU BackBoard
C
2
3/8” Flat Washers
B
4
3/8” Hex Nuts
D
4
3/8” Lock Washers
Notice:
These instructions only address the installation of the 42 X 72 glass or polycarbonate backboard to
the Ultimate Series Pole System. Use the BA871, BA872 instructions located in the pole system
hardware box for correct pole and extension arm installation.
Содержание BA873
Страница 2: ...2 B C D B D A...
