28
11-8 Swing arms
1. Fully draw out the slide arms to ensure that the stoppers work and that the stopper bolts are
sufficiently tightened.
2. Check for foreign matter, rust, or the like that prevents normal sliding.
3. Check the lift arms for thickness.
⇒
Replace the arms if their thickness is smaller by 20% from the standard value.
11-9 Base
1. Retighten the anchor bolts with a torque of 100 N∙m.
2. Check for swells, cracks, or any other defects in the floor surface around the anchor bolts.
3. Retighten the
bolts (M16) securing the posts to the bases with a torque of 250 N∙m.
Standard
thickness
Limit
thickness
1. Two-piece long arm
Dimension
A
6.0 mm
4.8 mm
2. Two-piece short arm
Dimension
B
6.0 mm
4.8 mm
2. Two-piece short arm
Stopper bolt
1. Two-piece long arm
Stopper bolt
A
B
