10
■ Safety Hook control lever
This lever disengages the lowering stop hook to lower the lift.
Pull the lever to the “Disengage” side to disengage the hook and
lower the lift. When the lift is lowered to the lowest position, the
lowering stop hook will automatically be engaged.
■ Arm Restraint device release lever
This lever disengages the arm restraint device. Pull the lever to
the “Unlock” side to set the arm on the vehicle lifting point,
allowing the arm to swing around freely.
When returning the lever after setting the arm, the restraint
device will operate to lock the arm. With the lift at the lowest
position, the restraint device release lever will automatically be
“unlocked.” When the lift is raised, the lever will automatically be
“locked.”
During lift-
up and work, keep the lowering stop hook “engaged.” Especially when starting
work with the lift halted, operate the hook
control lever to “engage” the lowering stop
hook.
The restraint devices do not support the load or impact of the vehicle.
(This device cannot prevent abnormal loads caused by offset loads or by supports in
improper contact. Pay close attention to the position of the vehicle or the engagement
of the supports.)
Caution
Caution
DO NOT lift a vehicle when any of the restraint devices is out of order.
The swing arms may move and dislodge the supports, causing the vehicle to fall.
Warning
“Lock”
“Disengage”
Unlocking
operation
Restraint device release
lever
Hook
control
lever
M post
“Enga
ge”
“Disenga
ge”
Содержание NSA3500N
Страница 38: ...37 MEMO...
Страница 39: ...38 MEMO...