Bishamon MUL30, Руководство по эксплуатации

Страница: 22 / 30

Anchor Bolts, Bolts and Nuts Loosening
Lubrication Points Lubrication
Lowering Stop Device (Hook)
Electric Circuit Operating conditions and breaking of wire
Hyd. Circuit Loosening of piping, breakage and leak
Air Circuit Operating conditions, air leak
Bearing, shaft Wearing
Inspection Point Inspection Items
Operating conditions of Lowering Stop Hook
In the event when even slightly abnormal condition arises during routine use of the lift,
Suspend the use of the lift immediately and make sure it is repaired properly and
verify safety before using the lift. Request the lift supplier where lift was purchased for
repairs on abnormality. Make sure to use Bishamon genuine parts for repair.
Hyd. Unit
Turning Radious Gauge
(Option-Model MUL30H)
Upper lift
(Model MUL30 and MUL30H only)
Lower lift
(Drive On Plate)
Leg
(Model MUL30H only)
Drive On
Ramp
Link
(Scissors)
Base
Wear the safety protector when proceeding inspection depending on the necessaty of
inspection items.
Have a qualified service personnel perform a periodical inspection once a year in
addition to the regular inspection of the above. Request lift supplier where the lift
was purchased for periodical inspection performed.