BIS HSW, Руководство пользователя

Страница: 19 / 45

19
4.14 Turning ON/OFF RTC [Fn14]
Under this function, user can turn on or off real time clock function.
a. Scale is off
b. Press and hold TARE(→) and press ON/OFF , display shows “Fn1”.
c. Continue pressing TARE(→) until display shows “Fn14”.
d. Press ZERO(↑) to enter, and display shows “rtC.oF”
e. Press MR(↓) to select between “rtC.on” or “rtC.oF”.
f. Press ZERO(↑) to confirm and exit the current function, display shows “ Fn15”-
g. Press MODE(ENT) to enter the next function, or press ZERO(↑) to exit. When ZERO(↑) is
pressed, display will show “SAVE” if setting was changed, user can either press MODE(ENT) for
yes to save the changes made or press ZERO(↑) for not to save the changes.
4.15 Time & Date Setup [Fn15]
Use this function to setup year, month and date as well as time in 24 hours format.
a. Scale is off
b. Press and hold TARE(→) and press ON/OFF , display shows “Fn1”.
c. Continue pressing TARE(→) until display shows “ Fn15” .
d. Press MODE(ENT) to enter, and display shows “ Y=XX”
e. Press ZERO(↑) for increasing and TARE(→) to change flashing digit, and press MODE(ENT) to
confirm and entering the next setting
f. Display shows “ M=XX” , press ZERO(↑) for increasing and TARE(→) to change flashing digit, and
press MODE(ENT) to confirm and entering the next setting
g. Display shows “ d=XX” , press ZERO(↑) for increasing and TARE(→) to change flashing digit, and
press MODE(ENT) to confirm and entering the next setting
h. Display shows “ H=XX” , press ZERO(↑) for increasing and TARE(→) to change flashing digit, and
press MODE(ENT) to confirm and entering the next setting
i. Display show “ M=XX” , press ZERO(↑) for increasing and TARE(→) to change flashing digit
j. Press MODE(ENT) to confirm to complete the setting
k. When setting is completed, display shows “Fn1” (or “ Fn20” if scale is in unlock condition)
l. Press ZERO(↑) to exit. When ZERO(↑) is pressed, display will show “SAVE” if setting was
changed, user can either press MODE(ENT) for yes to save the changes made or press ZERO(↑)
for not to save the changes.
4.16 Manufacturing Site Gravity Value Setup [Fn20]
ATTENTION !!!
This function is locked by manufactureer and can’t modified by user.