Birth Alarm Mobile Multiple, Руководство пользователя

Страница: 24 / 44

24
EN
9.2 Sleeping mode on the Slave
You can switch on the sleeping mode on the Slave as follows:
•
Hold the back of the screwdriver against the red
square ( ) beside the symbol on the side of the
Slave .
•
The status light will turn to green. Continue to hold
the screwdriver close to the red square ( ).
•
The status light will flash green 2x and then 3x.
After that the light will briefly show a yellow light
1x.
•
The Slave has now been activated in the sleeping
mode, and it can be attached to your mare.
9.3 Angle setting on the Master
The Birth Alarm Mobile Multiple will respond when your mare stretches
itself. In other words: it measures the extent to which your mare has moved
to its side. On average, an angle of more than 65° may be considered
"abnormal", and this will prompt the Birth Alarm Mobile Multiple to respond.
The standard setting of the Birth Alarm Mobile Multiple
is 65°. However, you
can increase this threshold of 65°, so that the Birth Alarm Mobile Multiple
becomes less sensitive and does not take action until a later stage. Complete
the following steps to change the angle setting (for instance to 70°) on the
Master :
•
On your own mobile phone, create the following text message: “ A1:70 "
(NB: Use capital A )
•
Put the Master into "programming mode" (see 8.1) . Wait until the status
light flashes 1x blue and 1x green alternately.
•
Now send the text message you have just prepared to the Master 's
mobile number.




