EN
3.
Preparing for use
3.1
The first time
To use Birth Alarm Lite 2.0 for the first time, you must perform these steps once:
•
Unscrew the Birth Alarm Lite 2.0 and remove the red label which is placed against the
pole of one of the batteries. The batteries now make contact with the Birth Alarm Lite
2.0.
•
Install the SIM card. SIM card not included, but can be easily purchased at a mobile
phone provider or local supermarket.
•
The chapter "Installing a new SIM card"
(see 6)
explains how to set up and install a newly
purchased SIM card.
•
Once you have completed these steps with your Birth Alarm Lite 2.0, you can close it
again and continue with the settings. When screwing in, ensure that the light conductors
are placed above the status lights
(see 4.2)
If you have good reception with your mobile phone in the stable or field where
your mare is, we recommend that you purchase a SIM card from the same
provider.
There may be special regulations in your country regarding the use of SIM cards in
automatic mobile systems (M2M). Ask your mobile phone provider or mobile
phone specialist whether this is the case.
Unscrewing
Removing the Label