Industrial Door Operating Instructions
Roller Shutter Door
A. Self Coiling (Push Up)
1.
TO OPEN:
Release all locking mechanisms on
the bottom rail, on the side, and elsewhere – lift
the door curtain upwards in a controlled manner,
to its full height, using a hook and pole where
provided.
2.
TO CLOSE:
Pull on the bottom rail, using hook
and pole where provided, and push door curtain
down to the fully closed position, and re-engage
locking mechanisms.
B. Hand Chain Operated
1.
TO OPEN:
Release hand chain from lockable
holder, release any additional locking
mechanisms, pull downward on the required hand
chain, in a controlled manner, until curtain is fully
open, replace hand chain into lockable position
and secure.
2.
TO CLOSE:
Release hand chain from lockable
holder, pull downward on hand chain, in a
controlled manner until door curtain is fully
closed, replace hand chain into lockable holder.
3.
Any Wicket gate installation
MUST
be hinged completely out of the
way prior to operating the door curtain.
Please note that the design of the counter balance
springs will mean that the curtain will rise at the bottom,
will be a little heavier to lift in the middle section, and
will rise to the top - DO NOT ALLOW THE DOOR TO
SLAM UPWARDS AGAINST THE STOPS.