Vendor: S000053
Page
4
of
5
Step 4:
Place the mid support (7) on top of both side frames (6) and secure using hardware parts G and H
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5:
Fit the base legs (8) to the mid support (7) according to the holes at the side and tightly secure using
hardware parts C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6:
Adjust both of the side supports (5) into inner direction until the screws reach the end of the hole as
shown. Tighten the screws for the side supports and the mid support.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
