Page 3 of 7
Vendor: S000238
Step 1:
Insert hardware part B to the side rails (3) using a small mallet (not provided).
Step 2:
Insert the dowels B into both siderails as per the drawing.
Please note that the support for the slats must be pointing up and the holes must be pointing outside.
Step 3:
Join the two rails (3) and attach the support leg (8) using hardware E, J, K (spanner not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
2x
3
2x
3
2x
B
B
B
2x
3
3
8
3
3
E
K
J
