Vendor: S000053
Page
4
of
5
Step 4:
Place the mid support (5) on top of the side frames (4) and tightly secure using hardware parts E and
F.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5:
Fit the base legs (6) to the mid support (5) according to the holes at the side, then tightly secure
using hardware parts D and G.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6:
Fit hardware part H to the mid support (5) then place hardware part I onto the end of each slat (7).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.