Vendor: S000053
Page
3
of
5
Step 2
: Secure the Frame Connectors (8) using hardware parts (C) and (D) for the back two bedposts as shown in view
AB
,
then insert hardware part (K) into the front two bedpost holes as shown in view
AA.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3
: Slot the Top Base (4) into the brackets on the Upper Frame (1) and secure using hardware parts (A) and (B) at the
four corners. Then secure the Bottom Base (3) using hardware parts (A) and (B) at the four corners but do not tighten the
screws yet.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Caution:
Do not tighten the screws of the
Base yet before assembling the
Side Rail bar (Step 4 & 5)
Bottom Base
Top Base
Sticker
'Top Base'
B
B
A
A
2
1
4
3
1
3
2
2
Big Allen
Key
Big Allen
Key
Top
Base
3
Bottom
Base
C
C
D
D
Frame Connector
with hole
Small
Allen Key
AA
8
Upper
Frame
