Arlo - 1 Drawer Bedside
Assembly Instructions
Page 2 of 8
For Care and Maintenance of your
bedside...
•
Always assemble in your desired room of use.
•
Always check all screws and fixings periodically
to ensure they are still secure.
•
Do not push or pull this bedside as it will cause
damage.
•
Always lift this bedside with a second person to
prevent damage or injury.
•
Keep any sharp objects away from this bedside.
•
Do not use any power tools as this will void your
guarantee.
For your Health and Safety...
•
Assemble this product laying flat, not upright.
•
Do not use this product if you find missing,
damaged or worn parts. Please contact your
retailer.
•
Please do not use this product until you have fully
secured all fixings.
•
Please keep all small components away from
children.
•
Please ensure this product is on an even, level
surface.
Als
o...
If your desired room of choice has a non-carpeted surface please ensure that you use some form of
protection and
do not
place directly on the wooden floor. This will prevent the product from moving and
therefore collapsing which will void your guarantee..
Before you begin...
1. Please check you have received the correct product.
2. Unpack all boxes and lay out each component on the floor.
3. Check your product for any damage that may be immediately obvious. If damage is identified,
please contact your retailer.
4. Please read through these instructions thoroughly to ensure you have constructed your bed
correctly.
