birddog NDI A200, Руководство пользователя

Страница: 36 / 48

33
Stream to Network
You can choose to disable the NDI output stream.
Encoder Screensaver
Assign a captured frame, black frame, or BirdDog logo as a screensaver.
Capture Screensaver Frame
Click the Capture button to capture the current frame for use as a screensaver.
Onboard Tally
Enable the camera Tally lights.
Genlock Source
Select the genlock source from the dropdown list.
NDI Failover Source
NDI® has a failover function whewre you can designate an alternate camera or NDI® source for the receiver, should
this camera become disconnected or otherwise unavailable on the network. Click on the Available NDI Sources
field to select your alternate source.
Update Source List
Pressing the Refresh button will add new sources to the list, whereas pressing the RESET button will populate the
list with only active NDI® sources. Click the APPLY button to apply your failover source change.
Device Restart
Restarts the NDI® stream. This may be necessary when changing key image settings, e.g., resolution.
CamControl
Camera Control Tab
Menu On / Off
To adjust cameras settings via the OSD (On Screen Display), click the Menu ON/OFF.
The OSD is visible on both the NDI® output and SDI/HDMI, and can also be accessed via the included remote
control. Since it uses the same controls for menu navigation, PTZ control of the camera movement will not be
possible until the OSD menu is closed again.
Zoom
Click the TELE button to zoom in and the WIDE button to zoom out.
Focus Mode
Select between Auto and Manual focus modes.
Focus
Click the IN button to focus on nearer subjects and the OUT button to focus on subjects further from the camera.
Pan / Tilt / Zoom Speed
When controlling your camera over NDI® you can individually set the maximum speed of PTZ movements. Higher
numbers produce faster and more sensitive movements of the camera.
Image Settings Reset
Click this button to reset all image settings to their factory default.