BIRD SignalHawk SH-36S-RM-ASL, Руководство по эксплуатации, Страница: 115 / 195

Create a Database
101
Adv. Logging — Logging/Playback Menu, click the Back... button to enter the correct
menu.
3. Select the appropriate csv file.
4. Do any of the following to edit the configuration file.
•
Add a span:
a. Enter settings
b. Click on Add New Span
•
Change a span:
Select the appropriate span in the Span Table.
Change the settings.
Click on Update Selected Span.
•
Delete a span:
Select the appropriate span in the Span Table.
Click on Delete Selected Span.
Repeat Step 4 until all of the desired frequency spans have been entered.
Click the OK button to save the changes.
NOTE
•
When you click on OK to save the new configuration file, you will be prompted to
create a new database. A new database must be created whenever a new
configuration file is created or when changes are made to an existing
configuration file. You cannot log data obtained from two different configuration
files into the same database.
•
Default location for saved configuration files is My Documents > PC SignalHawk >
ASL > My Configurations folder. Configuration files are saved as CSV files.
7. Create a new Database. See Create a Database .
Create a Database
In order to collect data, an SQL Database must be attached to hold the collected data. For most
applications, this will be achieved by creating a new database, but an existing database could
also be attached, see Attach an Existing Database .
1. Click on Adv. Logging.
NOTE
If a database is currently attached, the Adv. Logging button will automatically enter the